Other HF Readers : OTR110 | OTR30 | OTR318 | OTR35 | OTR508 | OTR800 | OTR803 | OTR8554 | Pegoda Reader
OTR800 reader is a multi-purpose (contact and contactless) reader/writer commonly used in a variety of applications including access control, transport and e-purse schemes. The antenna and associated electronics are all assembled in a single ABS casing. OTR800 contains a micro-controller unit that controls a RF field generated at a frequency of 13.56MHz.
OTR800 can detect the existence of all MIFARE tags through a sensitive RF circuit with a true anti-collision function facilitating simultaneous identification of several cards even when these are wrapped. Information from the card is passed on to the micro-controller. OTR800 will process the information to the controller via a USB, RS232, RS485 or Wiegand interface. OTR800 comes complete with an LCD character display and audible beeper.
And with our latest field upgradable firmware feature, you will be able to deploy and make firmware upgrades to adapt to your application needs in a cost-effective and timely manner.
(Small footprint version OTR803 module is also available)
|ISO Standard||ISO 14443A + ISO 7816|
|Reading Distance||< 10cm|
|Interface||USB / RS232 / RS485 / Wiegand|
|Baud Rate||106 kbit|
|Power Supply||5VDC±5% Maximum: 500mW|
|Read Response||< 0.1 sec|
|Operating Temperature||0°C to +50°C|
|Storage Temperature||0°C to +70°C|
|Operating Humidity||0 to 90%RH|
|Dimensions||148 x 106 x 33mm|
|Supports||One Main IC card and two SAM cards|
|Read Indication||122 x 32 dot LCD / Beeper|
|Software Developer Kit||OTR800 SDK.rar|
*Subject To Change Without Prior Notice